Link-systems OmniLink - PLC Interface Instrukcja Użytkownika Pobierz pdf (Strona 24)

June 5, 2000 Man ual Rev 1 .0 3.10

Figure 3.7: Example Status Label Configuration Screen

The four status lines can be individually enabled or disabled on a line by line basis. If “Line X Used” is

“Yes” then the status line will be shown on the PLC operation screen (see “e” on Figure 4.1 to see what

this configuration shown in Figure 3.6 would look like on the operation screen)

Each status line label can consist of up to 15 characters. Notice also, that Line 1 and Line 3 could be

used instead of Line 1 and Line 2 to provide a space between status lines if desired.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 52 53

Brak uwag

Link-systems OmniLink - PLC Interface Instrukcja Użytkownika Strona 24